-
Electromechanical lot system
NivoBob® - NB 3100
Medium Solids Process pressure -0,5 bar … +1,7 bar (-7.3 psi … +25 psi) Process temperature -40°C ... +250°C (-40°F … +482°F) -
Electromechanical lot system
NivoBob® - NB 3200
Medium Solids Process pressure -0,5 bar … +1,7 bar (-7.3 psi … +25 psi) Process temperature -40°C ... +250°C (-40°F … +482°F) -
Electromechanical lot system
NivoBob® - NB 3300
Medium Solids Process pressure -0,5 bar … +1,7 bar (-7.3 psi … +25 psi) Process temperature -40°C ... +80°C (-40°F … +176°F) -
Electromechanical lot system
NivoBob® - NB 3400
Medium Solids Process pressure -0,5 bar … +1,7 bar (-7.3 psi … +25 psi) Process temperature -40°C ... +80°C (-40°F … +176°F) -
Electromechanical lot system
NivoBob® - NB 4100
Medium Solids Process pressure -0,2 bar … +0,2 bar (-3.0 psi … +3.0 psi) Process temperature -40°C ... +80°C (-40°F … +176°F) -
Electromechanical lot system
NivoBob® - NB 4200
Medium Solids Process pressure -0,2 bar … +0,2 bar (-3.0 psi … +3.0 psi) Process temperature -40°C ... +80°C (-40°F … +176°F)
with electromechanical plumb bob sensor
with an electromechanical plumb bob sensor is one of the most customer-friendly technologies due to its simplicity and comprehensibility. The basis of this measuring method is the tape or rope coil driven by an electric motor and the sensing weight attached to it. This can be adjusted to the bulk density of the medium.
are mounted on the container roof. A sensing weight is lowered into the vessel. The sensing weight is attached to the end of a measuring cable/tape, which is wound on a spool driven by an electric motor. When the sensing weight hits the product, the spooling direction is reversed and the weight returns to its initial position. During the downward movement of the sensing weight, the distance is measured electronically by the rotation of the rope/tape reel. The microprocessor converts the measured distance into a volume-specific output signal that depends on the silo geometry. The output signal is updated after the sensing weight hits the product.
Electromechanical plumb bob sensors are also suitable for . The sensing weight is immersed in the liquid and reverses its direction of rotation only when it reaches the solid surface. The sensing weight can be universally adapted to the density of the sediment.