Full detection in Carbon Dust with VN 4020

The Challenge

The customer developed a system to reclaim carbon from carbon fibre panels. During the process the carbob fibre sheets were sent through a furnace where the resins are burnt off and the carbon fibre is reduced to a fine dust. This dust is then transfered to a holding hopper and then bagged. The customer needed a level switch which could work within a very dusty enviroment with a fine dust which could build up.

Our Solution

The customer trialled a Vibranivo VN 4020 set at a sensitivity of 150g/l which worked well within the harsh enviroment and allowed the customer to have confidence that the hopper would not overfill.